Application & Characteristics:
This testing machine is mainly used in test of tensile,
compression, cutting and bending of metal materials as well as
compression and bending of wood, cement and concrete. This machine
is applicable to the laboratories of scientific research
institutes, infrastructure construction organs, junior colleges,
metallurgy and machinery manufactory, etc.
Adopting dynamic dynamometer, this machine is divided into two
independent parts with the main engine.
Equipped with a tracing device, this machine can trace the load
deformation curve of the material
Main Technical Parameters :
Items | WE-50 | WE-100 | WE-300 | WE-600 | WE-1000 |
Max.Testing Force（kN） | 50 | 100 | 300 | 600 | 1000 |
Survey Range(kN) | 0-10
0-20
0-50 | 0-20
0-50-100 | 0-60
0-150-300 | 0-120
0-300
0-600 | 0-200
0-500
0-1000 |
Graduation Unit of Gauge(kN) | 0-10 0.02/ metre | 0-20 0.05/ metre | 0-60 0.2/ metre | 0-120 0.5/ metre | 0-200 0.5/ metre |
0-20 0.05/ metre | 0-50 0.1/ metre | 0-150 0.5/ metre | 0-300 1.0/ metre | 0-500 1.0/ metre |
0-50 1.0/ metre | 0-100 0.2/ metre | 0-300 1.0/ metre | 0-600 2.0/ metre | 0-1000 2.0/ metre |
Accuracy of Value Displayed | ±1% | ±1% | ±1% | ±1% | ±1% |
The Max.Distance Between Flexible Clips(mm) | 0-600 | 0-600 | 0-750 | 0-750 | 0-750 |
Distance Between Two Props instretding Test(mm) | 400 | 400 | 530 | 580 | 740 |
Clipping Thickness and The Max.With of Flast Sample(mm) | 15×14 | 15×40 | 15×75 | 30×80 | 40×125 |
Distance Between Upper Lower Plates(mm) | 0-250 | 0-250 | 0-300 | 0-300 | 150-400 |
Distance Between Two pull-rods in Compression Test(mm) | 284 | 284 | 364 | 370 | 440 |
Distance Between Two Fulcrums of Bending Test(mm) | 30-600 | 30-600 | |
